Product Center

85 mm Pop-Up Desk Socket with Four AC Outlets, USB-A/C and Wireless Charging

  • 85 mm Pop-Up Desk Socket with Four AC Outlets, USB-A/C and Wireless Charging
  • 85 mm Pop-Up Desk Socket with Four AC Outlets, USB-A/C and Wireless Charging
  • 85 mm Pop-Up Desk Socket with Four AC Outlets, USB-A/C and Wireless Charging
  • 85 mm Pop-Up Desk Socket with Four AC Outlets, USB-A/C and Wireless Charging
Name:85 mm Pop-Up Desk Socket with Four AC Outlets, USB-A/C and Wireless Charging
Product name:85 mm cut-out pop-up socket, 4 AC + USB-A/C + wireless
Model:PP85-2
Material:PC, brushed finish
Configuration:4 x universal AC + 1 x USB-A + 1 x USB-C + 15 W wireless charging
Rated current:16 A
Rated voltage:110-220 V
Cut-out:85 mm
Cable length:1.5 m
Colour:Black / Grey / White
Certification:CE, ETL, KC, RoHS
Application:Office desk, kitchen counter, meeting table

Product Description

An 85 mm cut-out pop-up socket for desks, counters and meeting tables. Press the top and the unit rises; four universal AC outlets sit alongside USB-A, USB-C and a 15 W wireless charging pad. Closed, the plate finishes flush with the surface.

Where it fits

Built-in workstation areas, office desks, kitchen counters and meeting tables where the surface has to stay usable between charges. The 85 mm cut-out keeps the footprint small.

Pop-up desk socket in use on an office desk

What you get

  • 85 mm cut-out, press-to-open lift, so the surface stays clear when closed

  • 4 universal AC outlets, 1 x USB-A and 1 x USB-C

  • 15 W wireless charging pad built into the top plate

  • 16 A rated, 110-220 V, 1.5 m cable

  • CE, ETL, KC and RoHS listed

  • Black, grey or white top plate

Wireless charging on the pop-up socket top plate

Tempered glass top plate pressed by hand

Specifications

ModelPP85-2
Cut-out85 mm
AC outlets4 x universal
USB1 x USB-A, 1 x USB-C
Wireless charging15 W
Rated current16 A
Rated voltage110-220 V
Cable length1.5 m
ColoursBlack, grey, white
CertificationCE, ETL, KC, RoHS

Installation into an 85 mm cut-out

Installation

Cut an 85 mm hole, drop the body in and tighten the clamp ring from below. No separate mounting bracket is needed. The source listing does not state a panel thickness range, so confirm your worktop dimension before ordering.

Dimensional drawing of the pop-up socket

Certification

CE, ETL, KC and RoHS. Certificate numbers are available on request.

CE, ETL, KC and RoHS certification marks

Hits: 【Print】 
Inquire about this product

Related Products